Stress‐dependent elastic wave velocity of microfractured sandstone     

Daisuke Katsuki  Marte Gutierrez  Abdulhadi Almrabat 《国际地质力学数值与分析法杂志》2014,38(5):441-456

A model for the stress‐dependent elastic wave velocity response of fractured rock mass is proposed based on experimental evidence of stress‐dependent fracture normal and shear stiffness. Previously proposed models and previous experimental studies on stress‐dependent fracture stiffness have been reviewed to provide a basis for the new model. Most of the existing stress‐dependent elastic wave velocity models are empirical, with model parameters that do not have clear physical meanings. To propose the new model, the rock mass is assumed to have randomly oriented microscopic fractures. In addition, the characteristic length of microfractures is assumed to be sufficiently short compared to the rock mass dimensions. The macroscopic stress‐dependent elastic wave velocity response is assumed to be attributed to the stress dependency of fracture stiffness. The stress‐dependent fracture normal stiffness is defined as a generalized power law function of effective normal stress, which is a modification of the Goodman's model. On the other hand, the stress dependency of fracture shear stiffness is modeled as a linear function of normal stress based on experimental data. Ultrasonic wave velocity responses of a dry core sample of Berea sandstone were tested at effective stresses ranging from 2 to 55 MPa. Visual observation of thin sections obtained from the Berea sandstone confirms that the assumptions made for microstructure of rock mass model are appropriate. It is shown that the model can describe the stress‐dependent ultrasonic wave velocity responses of dry Berea sandstone with a set of reasonable material parameter values. Published 2013. This article is a U.S. Government work and is in the public domain in the USA.  相似文献   

小尺度网格层析速度建模方法在低幅构造区时深转换中的应用     

吕振宇  魏鹏 《地球物理学进展》2020,(1):339-344

渤海M油田区浅层多发育低幅构造,低幅构造区的地震数据对常规层析成像不够敏感,导致常规速度反演方法很难保证低幅构造速度建模的准确性,从而给时深转换工作带来较大误差.本文提出一种小尺度网格层析速度建模方法,该方法基于低幅构造的薄层信息,在有薄层信息的地层加密网格分布,从而实现根据地质条件划分网格的策略,进而通过解析矩阵方程实现速度模型的迭代更新.通过实际数据应用证明,对于渤海M油田利用本文提出的高精度网格层析速度建模方法是有效可行的,该方法能够有效提高低幅构造区速度建模的精度,利用该方法得到的速度模型能够大幅提高时深转换的精度,从而指导构造解释及成图工作.  相似文献   

利用爆破事件分析不同速度模型下常规定位方法定位结果     

李兴泉  吴朋  唐淋 《地震地磁观测与研究》2020,(1):25-32

地震定位对速度模型的依赖性很强.四川地区地形复杂,常规工作中可选取多种速度模型进行定位.川西龙门山断裂带为东南部四川盆地和西北部青藏高原东部山区的明显分界线,近年在此断裂带上发生多次较大地震.对发生在该断裂带附近的6个爆破事件和15个天然地震重新定位,并对比结果.研究表明,相同台站包围情况下,川滇3D速度模型稳定性最好,但对浅表爆破不太准确.相比HypoSat(一维速度模型)组合,台站分布对Hypo2000(一维速度模型)和Hypo2000(赵珠速度模型)组合的定位结果影响较大.  相似文献   

基于HYCOM再分析数据研究琉球海流的形成与起源     

汪敏  刘昭君  朱小华  闫晓梅  张钟哲  赵瑞祥 《海洋学报(英文版)》2019,38(11):1-10

The origin of the Ryukyu Current(RC) and the formation of its subsurface velocity core were investigated using a 23-year(1993–2015) global Hybrid Coordinate Ocean Model(HYCOM) dataset. The volume transport of the RC comes from the Kuroshio eastward branch(KEB) east of Taiwan and part of the North Pacific Subtropical Gyre(pNPSG). From the surface to 2 000 m depth, the KEB(p-NPSG) transport contributes 41.5%(58.5%) to the mean total RC transport. The KEB originally forms the subsurface velocity core of the RC east of Taiwan due to blockage of the subsurface Kuroshio by the Ilan Ridge(sill depth: 700 m). Above 700 m, the Kuroshio can enter the East China Sea(ECS) over the Ilan Ridge, meanwhile, the blocked Kuroshio below 700 m turns to the right and flows along the Ryukyu Islands. With the RC flowing northeastward, the p-NPSG contribution strengthens the subsurface maximum structure of the RC owing to the blockage of the Ryukyu Ridge. In the surface layer, the pNPSG cannot form a stable northeastward current due to frequent disturbance by mesoscale eddies and water exchange through the gaps(with net volume transport into ECS) between the Ryukyu Islands.  相似文献   

An efficient hybrid integral-equation method for point-absorber wave energy converters with a vertical axis of symmetry     

《Applied Ocean Research》2019

To assist in the prototyping and controller design of point-absorber wave energy converters (WECs), an easy-to-implement hybrid integral-equation method is presented for computing the frequency-domain hydrodynamic properties of bodies with a vertical axis of symmetry in waves. The current hybrid method decomposes the flow domain into two parts: an inner domain containing the body and an outer domain extending to infinity. The solution in the inner domain is computed using the boundary-element method, and the outer-domain solution is expressed using eigenfunctions. Proper matching at the domain boundary is achieved by enforcing continuity of velocity potential and its normal derivative. Body symmetry allows efficient computation using ring sources in the inner domain. The current method is successfully applied to three different body geometries including a vertical truncated floating cylinder, the McIver toroid, and the coaxial-cylinder WEC being developed in the authors’ laboratory. In particular, the current results indicate that, by replacing the flat bottom of the coaxial-cylinder WEC with the Berkeley-Wedge (BW) shape, viscous effect can be significantly reduced with only minor negative impact on wave-exciting force, thus increasing WEC efficiency. Finally, by comparing to experimental measurements, the current method is demonstrated to accurately predict the heave added mass and wave-exciting force on the coaxial-cylinder WEC with BW geometry. If a viscous damping correction factor is used, the heave motion amplitude can also be accurately computed.  相似文献   

环渤海区域及邻区现今地壳构造运动形变特征分析     

赵旭坤  张俊  雷前坤  范成成 《大地测量与地球动力学》2019,39(11):1101-1105

将环渤海区域划分为5个次级块体，利用整体旋转与线性应变模型分析2009~2014年中国大陆构造环境监测网络的GPS对地观测速度场数据，得到相对于欧亚板块0.5°×0.5°的水平运动速度场和应变场。分析形变速度场和应变场的空间变化发现，环渤海区域整体上呈现0.25×10^-9/a的NW-SE 111.3°的双向趋势性扩张运动，太行块体、山西块体分别呈NW-SE 116.3°、NW-SE 130°的微弱扩张运动，胶辽块体、冀鲁块体和阴山-燕山块体分别存在NW-SE 144.3°、NE-SW 39.5°和NW-SE 155.6°的微弱压缩运动，其中太行块体的扩张运动量级相对于其他次级块体较大。尽管环渤海区域内部各次级块体的形变在空间上存在以上差异，但整体上环渤海区域主压应变轴方向基本为NEE-SWW，主张应变轴方向为NNW-SSE，且主压应变轴走向为NE 47.70°～89.74°，与利用地球物理方法得到的主压应变轴优势方向大体一致，表明环渤海区域现今地壳运动相对稳定。  相似文献   

浙江省台州-昌化深部构造特征探测     

杨福平  余刚群  侯林锋  孙海青 《大地测量与地球动力学》2019,39(2):142-147

采用高分辨折射和宽角反射/折射综合地震探测方法，在浙江省中部沿黄岩、临海、东阳、桐庐、昌化进行深部构造探测，获得一条长约350 km的速度结构剖面。探测结果表明，地壳结构具有明显的多层性，存在3个速度间断面;基底速度结构图像揭示了速度结构的横向非均匀性，这种不均匀性既对应于地质构造单元的分界线或断裂构造带，也反映出东西部构造特征的差异性。  相似文献   

唐山地区波速比变化特征研究     

王亚茹  宋昭  刘晓丹  郭蕾  王妍  王时  宫猛  王想 《大地测量与地球动力学》2019,39(7):686-690

选取唐山地区2008~2018年震相数据，利用单台多震和达法和多台多震和达法分别计算波速比，结合研究区内的地震活动对波速比的变化特征进行研究。结果显示，多台多震和达法得到的波速比结果较为稳定，而单台多震和达法得到的结果变化幅度大，显示更多细节；唐山地区ML≥4.5地震发生前单台波速比存在不同程度的异常，异常台站的方位与地震具有一定的对应性。  相似文献   

基于偏移追踪的青藏高原卓琼冰川流速监测及成因分析          下载免费PDF全文

丁一凡  程晓  程铖  惠凤鸣 《地球物理学报》2017,60(5):1650-1658

冰川作为地球系统中重要的组成部分,是全球气候变化的敏感指示器和调节器.冰川运动的遥感监测也是进行冰川研究的重要内容.本文主要采用偏移追踪的方法,利用2003-2010年期间7对雷达单视复数数据监测了青藏高原珠穆朗玛峰地区的卓琼冰川运动情况.经验证,本研究获得的冰川流速结果可靠.卓琼冰川的流向自西向东,流速自冰川末端向上游积累区逐渐增加,流速大小主要来自距离向的贡献.研究结果显示,卓琼冰川在2003-2005年期间流速较大,最大流速达到45 m·a~(-1),而在2005-2010年期间流速有所降低,最大流速在35~40 m·a~(-1)范围内波动;卓琼冰川年际间流速变化基本一致,冰川中部存在流速突变情况,突变幅度为3~7 m·a~(-1),但该尺度的突变并不会影响卓琼冰川的总体运动趋势.此外,本文还分析了气象以及地理位置因素对卓琼冰川运动的影响.  相似文献   

青藏高原东北缘及周边地区基于程函方程的面波层析成像   总被引：7，自引：2，他引：5       下载免费PDF全文

钟世军  吴建平  房立华  王未来  范莉苹  王怀富 《地球物理学报》2017,60(6):2304-2314

利用"中国地震科学台阵探测"在南北地震带北段布设的670套宽频带地震台站记录到的面波资料,使用新近发展的程函方程面波层析成像方法,获得了青藏高原东北缘及周边地区12~60 s周期范围比以往成像结果具有更高分辨率的瑞利面波相速度分布图像.青藏高原东北缘的祁连褶皱系西段、秦岭褶皱系西段和松潘一甘孜褶皱系,在16~60s周期范围内均显示出明显的低速异常分布,表明该地区的地壳力学强度较低,在强烈的构造应力作用下易发生形变.与西段不同,祁连褶皱系东段和秦岭褶皱系中段的相速度分布特征揭示,其中下地壳的速度明显高于高原内部区域.鄂尔多斯块体整体上表现为稳定块体具有的高速特征,但其西部边缘在中上地壳的速度比块体中部地区偏低,且存在一定的不均匀性.鄂尔多斯块体西北缘的临河断陷盆地和西缘的银川断陷盆地,在较短的周期范围内(12~20 s)表现为局部低速特征,但与银川断陷盆地不同,临河断陷盆地的低速特征可一直延续至60 s周期以上,表明该盆地下方地壳及上地幔速度明显偏低,可能与深部热作用有关.阿拉善块体与其北部地区的速度差异主要表现在中上地壳,这一现象值得今后进一步探讨.基于程函方程面波层析成像方法给出了青藏高原东北缘及周边地区高分辨率的成像结果,揭示了以往面波层析成像难以获得的深部细节特征,为该地区的深部构造研究提供了新的信息.  相似文献